Home > Vibration Sensor >

AKM394 Crash Inspect Vibration Shock Sensor , Magnetic Vibration

Product Categories

Tilt Sensor Inclinometer [169]
Dynamic Inclinometer [55]
High Accuracy Digital Inclinometer [87]
2 Axis Digital Inclinometer [28]
Analog Inclinometer [24]
Wireless Tilt Sensor [14]
3D Digital Compass [71]
Vibration Sensor [45]
Angle Sensor [42]
Vibration Detection Sensor [26]
Tilt Switch Sensor [22]
IMU Inertial Measurement Unit [5]
Gyro North Finder [3]
Digital Display Inclinometer [10]
Dynamic Electronic Compass [5]
Bluetooth AHRS [2]

Shenzhen Rion Technology Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

AKM394 Crash Inspect Vibration Shock Sensor , Magnetic Vibration

Name: AKM394 Crash Inspect Vibration Shock Sensor Magnetic Vibration
Brand: RION
Price: 235.00 USD

Wholesale AKM394 Crash Inspect Vibration Shock Sensor , Magnetic Vibration from china suppliers

Axis : three

output : RS232 RS485 TTL 0~5V 4~20mA

Resonant frequency : 2.4kHz

Noise density : 21μg/√Hz

Bandwidth (3DB) : 500Hz

Brand Name : RION

Model Number : AKM394-20

Certification : CE, ISO

Place of Origin : Guangdong, China

MOQ : 1

Price : $235.00/Pieces

Payment Terms : T/T,PAYPAL

Supply Ability : 3000 PCS/MONTH

Delivery Time : 7 days for samples

Packaging Details : 1pcs vibration sensor in each inner box , 50pcs/ctn

power supply : DC 9~36V

Deviation calibration : <1mg

Name : impact detecting sensor

Contact Now

AKM394 Crash Inspect Vibration Shock Sensor , Magnetic Vibration

▶ PRODUCT FEATURES

Three axes (X, Y, Z)
Output signal: RS232; RS485; TTL
Power supply voltage: 9~36V
Shock resistance: 2000G
Operating temperature: -40℃~ +85℃
Storage temperature: -40℃ ~ +85℃
Excellent deviation stability, good environmental performance (shock, vibration and temperature)

▶ PRODUCT APPLICATION

Bridge
Automobile
Roller
Wind power
Medical equipment
Large machinery and engine
Low frequency vibration and automatic monitoring
Crash recording, fatigue monitoring and prediction
Traffic system monitoring, subgrade analysis and high-speed railway fault detection

AKM394 Crash Inspect Vibration Shock Sensor , Magnetic Vibration

AKM392 three-axis vibration sensor is a widely used product independently developed , which can be applied to vibration testing, impact testing and other fields. The product adopts digital interface output, RS232/485/TTL is optional, and different address codes can be set. Multiple sensors are connected in series for a long distance, which is convenient for multi-point measurement and data analysis. The AKM392 is a monocrystalline silicon capacitive sensor consisting of a micromachined silicon chip, a low-power ASIC for signal conditioning, a microprocessor for storing compensation values, and a temperature sensor. This product has low power consumption, solid structure and stable output after calibration. The new electronic configuration provides solid state power for reset, providing protection against over-current. The long-term stability and deviation of the scale factor are typically less than 0.1% over the full scale range. This product has the characteristics of solid structure, low power consumption and excellent deviation stability, which ensures stable output reliability.

Specification

AKM392	PARAMETER						UNIT
Measure range	±2	±4	±8	±10	±20	±40	g
Deviation calibration	<1	<1	<1	<1	<1	<1	mg
Measure axis	X,Y,Z	X,Y,Z	X,Y,Z	X,Y,Z	X,Y,Z	X,Y,Z	Axis
Power on/off repeatability	<2	<2	<2	<2	<2	<2	Mg (Max)
Temp. coefficient of deviation	0.01	0.01	0.01	0.01	0.01	0.01	%/℃ (typical)
Resolution/Threshold (@ 1Hz)	< 1	< 1	< 1	< 1	< 1	< 1	Mg (Max)
Nonlinearity	<0.5	<0.8	<1	<1	<1	<1	% FS (Max)
Bandwidth (3DB)	500	500	500	500	500	500	Hz
Cross-axis sensitivity	1	1	1	2	2	2	%
Transverse vibration sensitivity ratio	1	1	2	5	5	5	%
Noise density	21	21	21	86.6	86.6	86.6	μg/√Hz
Resonant frequency	2.4	2.4	2.4	5.5	5.5	5.5	kHz
Automatic output rate of 68 protocol	5Hz,10Hz,25Hz,50Hz,100Hz,200Hz,500Hz,1000Hz
MODBUS automatic output rate	10Hz,25Hz,50Hz
Output interface	RS232/RS485/TTL
Communication protocol	Reifen 68 protocol and MODBUS RTU protocol
Input (VDD _ VSS)	9-36 VDC
Operating current consumption	<60mA @ 12 VDC
Protection	IP67
Material	aerospace aluminum
Weight	Product net weight: ≤116g, magnetic base: ≤50g
Size	Product size: L36 × W32 × H24mm Size of magnetic adsorption base plate: L36 × W32 × H7mm

Size

AKM394 Crash Inspect Vibration Shock Sensor , Magnetic Vibration

ELECTRICAL CONNECTION

Color

Function

RED

BLACK

WHITE

GREEN

DC9～36V

Positive pole of power supply

GND

Negative pole of power supply

RS232(RXD)

Or RS485 (D +)

RS232(TXD)

Or RS485 (D-)

PRODUCT MEASUREMENT DIRECTION

AKM394 Crash Inspect Vibration Shock Sensor , Magnetic Vibration

Product Tags:

Magnetic Vibration Shock Sensor AKM394

AKM394 Crash Inspect Sensor

AKM394 Crash Inspect Vibration Shock Sensor , Magnetic Vibration Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Shenzhen Rion Technology Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!